Products / Electronic security systems / Monitoring centre / CD1000R Operational features

CD1000R

DIGITAL REPEATER UNIT FOR ALARM/GPS SIGNALS

FROM ENCODER/TRANSMITTER UNITS

   The CD 1000R module is designed to receive, process and transmit signals, incoming from remote end users to a selected central station via radio channels or a spare phone cable pair. It is indispensable in locations without any direct radio link between the encoder/transmitter units on the sites and the receiver station or in cases of frequent poor quality radio connection. The relay stations should be stationed in areas, ensuring good link with the sites under surveillance and the central station alike.
 

Operational features:

• Number of audio input ports: 4 of which, two input ones and two input/output ones for analog information designed for direct connection to output ports of radio stations or radio receivers

• Input signal level ranges from 30 mV to 3 V.

• Frequency range: 1500 -2500 Hz. min.

• Output signal level: from 0 to 5 V.

• Output for radio station PTT control: collector open to ground; current max. -1 Amp.

• Capable of receiving and transmitting information at the same radio frequency as well as receiving
  at one frequency and transmitting at another one.

• Handling alarm events from up to 8192 subscriber sites when operated jointly with KEL 780
  encoder/transmitter units and events from up to 65536 sites, covered by up to 8 transmitter
  stations, inter-linked in a radio network and using encoder /transmitter unit CK-022.Програмируемо Време за подготоВка на предаВателя

• Recognizing of standard ALARM, RESTORE and TROUBLE events in quadrants 1 to 8,
  OPEN/CLOSE status at the subscriber sites, STARTING, TEST, AC TROUBLE and RESTORE, LOW
  BAT and BAT RESTORE and 256 more other events in aU.

• Retransmission of events from each one site can be passed or canceled either by the use of PP-200
  portable programmer or remotely by the control center.

• The relay station makes it possible for each one site to preset a multiplication factor for the
  information transmitted.

• Time presetting for transmitter preparation

• Time presetting between each two package transmissions.

• Capability of handling GPS information to pinpoint the precise location of monitored vehicles.

• Casing designed as a self-contained module. CD-1000R-K option, complete.

• Power supply of 9V to 24V DC (saved)

• Power consumption 80mA at 14V.