|
ÒECHNICAL PARAMETERS
• Number of audio input
ports: 4 of which, two input ones and two input/output ones for
analog information designed for direct connection to output ports of
radio
stations or receivers.
• Input signal level ranges from 30 mV to 3 V.
Recommended level is 1 - 2Vpp. I
• Frequency range: 1500 - 2500 Hz. min.
• Output signal level: from 0 to 5 V., adjustable
• Output for radio station PIT control: collector open
to ground; current max. -1 Amp. 1
• Printer output - a parallel Centronics interface port
• Computer output two in-series interface RS232C Ports,
7/8-bit data registers, with/without odd/even parity control, with
1/2 stop-bits, speeds of 300 to 9600 bps, |
with/without a computer confirmation, freely programmable.
• Interface registers: RADIONICS RADS500, ELECTRONICS
LINE andTEC98
• 8-pushbutton keypad
• Indication - an illuminated LCD display monitor,
brightness adjustable, in 4 lines of 40 characters each. Information
is displayed in several languages. j
• Handling of up to 8192 alarm events on stationary
subscriber sites.
• Recognizing of standard ALARM, RESTORE and TROUBLE
events in quadrants 1 to 8,
• OPEN/CLOSE status on subscriber sites, STARTING, TEST,
AC TROUBLE and RESTORE, LOWBAT and BAT RESTORE and 256 rare other
events in all.
• Capable of handling GPS information for pinpointing
the precise location of monitored vehicles.
• Keeping its status in case of power failures.
• System for dynamic self-test and operation
self-recovery.
• Capable of joint operation with alarm signal repeaters
CD1000R.
• Housing box designed as a module to be built in
control panels.
• Power supply of 9V to 24V DC (saved)
• Power consinnption 100mA with screen lighting Off and
less than 220mA at screen brightness max. 14V.
Functional possibilities ²
Technical description |
² 
