Products / Electronic security systems / MONITORING CENTRE

CD 1000
RECEIVER CENTRAL STATION FOR MONITORING OF ALARM SIGNALS

The receiver station CD-1000 is designed to receive and process signals incoming from end users that are secured by technical means via a radio channel or a free ■ telephone cable pair. The station recognizes the subscriber sites and any alarm events that take place there, displaying themin an appropriate way onto a monitor, I computer and a printer. It allows for monitoring of signal security, fire alarm, fire extinguishing and gas alarm systems.

Technical parameters. І Functional features

СКТ
ENCODER/TRANSMITTER UNIT OF ALARM SIGNALS
 

The CKT 152/301 module is designed to operate in combination with alarm central stations. Its function is to receive, encode and transmit information about any changes in the status of the sites under surveillance to a receiver station or a repeater via a radio channel.

Technical parameters. І

CD-1000 R
DIGITAL REPEATER UNIT FOR ALARM/GPS SIGNALS FROM ENCODER/TRANSMITTER UNITS
 

The CD 1000R module is designed to receive, process and transmit signals, incoming from remote end users to a selected central station via radio channels or a spare phone cable pair. It is indispensable in locations without any direct radio link between the encoder/transmitter units on the sites and the receiver station or in cases of frequent poor quality radio connection. The relay stations should be stationed in areas, ensuring good link with the sites under surveillance and the central station alike.

Technical parameters. І І

CK-021, CK-022, CK-023, CK-024
ENCODER/TRANSMITTER UNITS FOR ALARM SIGNALS

• CK-021 it receives information about the status of end users, encodes and transmits it in an appropriate way to a receiver station or a repeater unit.

• CK-022 - ... + 3 radio formats, control of 8 radio channels.

• CK-023 - ... + receives and performs functions set by the control center

• CK-023A - ... + receiver - decoder, 8 outputs, RS 232, for control of  transmiters

• CK-024-... + transmits data from GPS modules

РР - 200
PORTABLE PROGRAMMER FOR ENCODER/TRANSMITTERS AND REPEATER CD-1000
 

The programmer model PP-200 is designed to visualize and update the system parameters of units CK 022, CK 024 and CD1000R. It is accomplished as a portable module. A software version of it for IBM compatible computers is also available.
 

Technical parameters. І

GPS MODULE
GP 15-1, GP 30-1, GP 40-1, GP - 1

These modules are installed into the transport vehicles and they are equipped with:
  - GPS receiver 8 channels TRIMBLE
  - a digital encoder
  - a built-in radio transmitter